News RSS



Doorstop Buy Near Boise Idaho

Ten stops that will make your door think twice before it slams shut.They open easily and with the same ease close with a slam and sometimes even creak non-stop. Our doors have a life of their own and so the brake was invented, designed to control its noisy desires - a dull gray triangle that keeps it open. But if there is already a door stop, why not design it? See our news we have put together 11 cool stops for you that will stop her in style.

Continue reading



High Security - Medeco

World high security locks industry research report 2020 – global market perspective, industry intelligence, size, share, growth, trends and forecasts up to 2025His research report consist of statistically analyzed quantitative and qualitative data about the global High Security Locks market. It provides a comprehensive analysis about the market size, market growth, drivers, restraints, challenges, threats, opportunities, trends and overall CAGR to the stakeholders and C’ level executives operating in the global High Security Locks market or looking to penetrate in the High Security Locks sector.

Continue reading



Drill Bosch Impact Meridian Idaho

The key figure is torque, measured in either foot pounds (ft. lbs.) or inch pounds (in. lbs). Higher torque generally equates to more consistent performance for longer. The speed of the hammer we use it for emergency lockout action will also be given, in BPM (blows per minute) or sometimes IPM (impacts per minute). Motor speed (in rpm) is also included, though less important in an impact driver than for a standard drill.

Continue reading



Drill Bits For Metal

Drill bits made with a titanium nitride coating resists corrosion and friction. It beats black oxide in that it increases surface hardness and does a better job reducing heat while drilling through metal. For metal drilling, we definitely put these as the bare minimum.With titanium nitride, you have to remember it only coats the bit. As the coating wears off the cutting edges, you pretty much have to replace them. Don’t use these bits for drilling hardened steel or stainless—not if you want them to last. Over the years, we’ve used and/or tested dozens upon dozens of drill bits for nearly all applications. In this go-around, we wanted to identify the best drill bits for metal applications. That includes hardened...

Continue reading